At Paintzone, we repaint Redmond homes inside and out, refinish cabinets, paint commercial spaces and offer specialty finishes such as Roman clay and limewash.
Redmond, WA · 98052
Painters in Redmond for interior and exterior work
Paintzone LLC, 600 W Olympic Pl #503, Seattle, WA 98119. (206) 899-5154.
Working with Paintzone
Owner-run
Paintzone is owned and run by Andrei Danu and Dorin Sirbu, who came to painting from architecture and mural work.
Specialty finishes in house
Limewash, Roman clay and tadelakt can go on the same estimate as the paint, from one accent wall to a whole room.
Interior painting
Before you pick a color, we look at the light in each room and at what is staying, such as floors, counters and cabinetry, and then match an existing color or help you build a new scheme. The interior service includes:
- Walls and ceilings
- Doors, window trim, door frames and baseboards
- Crown molding, wainscoting and built-ins
- Drywall repair and wallpaper removal
- Sanding and priming, with oil primer on millwork
- Shop spraying for doors and larger millwork
- Color consultation and color matching
Exterior painting in Redmond
Fences and decks get a stain in the opacity that suits the wood and how exposed it is, or a solid color where a fence should look painted. The exterior service includes:
- Pressure washing and scraping
- Repairs to soft or split trim and siding
- Priming of bare and repaired wood
- Siding, trim, soffits, shutters and doors
- Deck and fence stains, from semi-transparent to solid
- Varnish or clear coat on doors and exterior wood
Why an exterior date can move
The new film needs to stay above the dew point for the two days after painting while it cures, and dew on a coat that has not finished forming can stain it and weaken its grip. A cool day is rarely the problem, since Sherwin-Williams rates its exterior paints for application down to 35F. When the overnight forecast is cold and wet, we reschedule rather than paint.
Commercial painting
We paint commercial interiors and exteriors in Overlake, downtown Redmond and along the Willows corridor. The commercial service includes:
- Offices, retail stores and shopping centers
- Restaurants, gyms and medical facilities
- Warehouses, museums and religious buildings
- Storefronts and multi-story exteriors
- Wood siding, stucco and metal
- Accent walls and specialty finishes in lobbies
If your space stays in use, we work outside your business hours, protect it daily and return each area at the end of the session.
Cabinet painting: kitchens and built-ins
Cabinet painting changes a kitchen without moving the boxes, the counters or the plumbing. We take the doors and drawer fronts off for shop spraying and mask the kitchen so the boxes can be sprayed on site. The cabinet service includes:
- Kitchen and bathroom cabinets
- Built-ins and laundry, office and garage cabinets
- Existing, new and previously painted cabinets
- Oak, maple, cherry, alder and other woods
- High-gloss finishes
Two-part coatings, and why we use them
The polyurethane we spray on cabinets comes in two parts, supplied by makers such as Milesi and Renner and combined just before spraying, and the mixture cures by chemical reaction into the hard surface cabinet doors need, where wall paint simply dries as its water evaporates.
Specialty finishes
Decide on any plaster finish before the repaint is scheduled. Walls that take Roman clay or limewash are prepared differently from walls that take paint, so the choice changes the order of the work.
The specialty finishes we offer include:
Limewash
A lime finish for masonry and interior walls that dries matte, with soft variation in color.
Roman clay
A troweled clay plaster, velvety to the touch, with a subtle sheen.
Tadelakt
A Moroccan lime plaster polished with olive oil soap, so it sheds water in showers without grout lines.
Venetian plaster
Thin layers of limestone or marble plaster, burnished to a hard, stone-like surface.
We also do microcement, French wash and high-gloss enamel on doors and millwork.
How we work
Consultation and estimate
We see the property with you, agree on colors and finishes, and the estimate follows.
Preparation
We mask floors and fixtures with durable coverings before the work starts.
Painting
We brush, roll or spray each surface, whichever leaves the better finish.
Final walkthrough
We check every surface, take down the protection, clear the debris and walk through the finished job with you.
Redmond painting FAQs
Can you paint the inside during the wet months?
Yes. Interior painting goes ahead in any season, so it can fill the wet months while an exterior waits for a dry forecast.
Are your exterior paints low-VOC?
Yes. We use low-VOC paints on exterior work.
Do you paint front doors and garage doors?
Yes, brushed or sprayed, and a front door can be finished in high gloss.
How to check a painting contractor before you sign
Before you hire anyone, including us, check the registration. Washington contractors register with L&I, and you can look up registration status, bond, workers' compensation and any legal actions at Lni.wa.gov/Verify.
Paintzone is on that register as a construction contractor, license number PAINTL*811QD, Washington UBI 604 513 060.
About a quarter of Redmond's housing was built before 1980, by the Census Bureau's estimate. The EPA's Renovation, Repair and Painting rule covers housing built before 1978, and anyone paid to disturb paint on those properties has to work for a certified firm. Paintzone is certified to work with lead paint.
Painting Across Seattle & the Eastside
Paintzone works in Seattle and across the Eastside, in Bellevue, Clyde Hill, Kirkland, Magnolia, Medina, Mercer Island, Newcastle, Queen Anne, Redmond, Renton and Sammamish.
Related services
To get started, request a painting quote or call (206) 899-5154. We are at 600 W Olympic Pl #503, Seattle, WA 98119.
