Bellevue, WA · 98006
At Paintzone we are a locally owned, Seattle-based painting company working across Bellevue and the Eastside. We handle interior and exterior repaints, kitchen cabinets, commercial property, and plaster and mineral finishes, all with our own painters.
Paintzone LLC, 600 W Olympic Pl #503, Seattle, WA 98119. (206) 899-5154.
Paintzone is owned by Andrei Danu and Dorin Sirbu.
Our own painters apply limewash, Roman clay, tadelakt and the other plaster finishes.
We are happy to walk the property with you and put the whole job in writing, at no charge, covering surfaces, preparation, products and price.
The interior service covers:
We paint interiors with Benjamin Moore, Sherwin-Williams and Farrow and Ball. Where a door or a run of trim should look like furniture, we use Fine Paints of Europe enamel.
We pick the sheen surface by surface. A long wall in raking light shows roller texture that a short wall hides, so the long wall gets a flatter finish and the trim beside it a higher one.
The exterior service covers:
Front doors can be finished in Fine Paints of Europe enamel.
Water collects on decks, handrails and sills instead of running off, and the two coating types behave differently there. A penetrating oil such as Armstrong Clark soaks into the wood. It does not peel or blister, and when it thins you touch up the worn areas instead of stripping the whole deck. An acrylic forms a film. It flexes with the boards and holds off mildew, which is what siding needs. So one house leaves with oil on the deck and acrylic on the siding.
Besides houses, we paint commercial property across Bellevue. The commercial service covers:
The first question is whether the building stays in use while we paint. If it does, we protect the space daily and hand areas back at the end of each session. If it is empty, we work straight through and spray where we would otherwise brush.
Repainting the boxes and doors changes a kitchen without replacing the cabinetry. The cabinet service covers:
The same process works on bathroom vanities, built-ins and furniture.
Wall paint is one component and waterborne. It dries as the water evaporates and the film stays fairly soft. A two-component polyurethane cures instead of drying. We mix the resin with a catalyst right before spraying, and the two cross-link into a film that is harder and holds up against abrasion and household chemicals, which is what a cabinet door faces every day. Mixed material has a pot life, so we use it that day or throw it out. That is why we spray Milesi and Renner 2K coatings on cabinetry.
Our painters do both the repaint and the plaster work, so a limewashed wall or a Roman clay room is estimated and scheduled together with the rest of the job.
A mineral finish for masonry and plaster.
Troweled on for a matte, slightly irregular surface.
A lime plaster used in showers and other wet areas.
Burnished to a polished finish with visible depth.
We also do microcement, French wash and high-gloss enamel on doors and millwork. Every one of these finishes is applied by hand and no two come out the same, so ask for a sample before you commit a room.
We look at the property, talk through what needs painting, and send a written estimate.
Cleaning, sanding and repairs to the surfaces being painted.
Brushed, rolled or sprayed depending on the surface.
We check the finished work against the agreed scope.
Materials and debris removed from the work area.
We walk the finished work with you.
Yes. Paintzone works on offices, retail, restaurants, warehouses and storefronts across the city, alongside residential repaints.
Look them up at Lni.wa.gov/Verify. It shows current registration status, how long they have been registered, workers' compensation coverage, and any legal action against the contractor or their bond. Paintzone is PAINTL*811QD, UBI 604 513 060.
Because water sits on a deck rather than running off it. A penetrating oil soaks into the fibers and wears rather than peeling, which is the failure mode a film coating has on a horizontal surface. Siding is the opposite case, where a flexible acrylic film that resists mildew is the better fit.
Yes, with preparation. We spray two-component polyurethane on cabinetry. It cures harder than wall paint and takes the handling a kitchen gives it.
Benjamin Moore, Sherwin-Williams and Farrow and Ball on interior walls and trim, Fine Paints of Europe enamel on doors and trim, Armstrong Clark oil on decks, Milesi and Renner 2K polyurethane on cabinets, and Portola, Romabio and Firenze for the specialty finishes.
Yes, and in writing.
Before you hire anyone, including us, check the registration. Washington contractors register with L&I, and you can look up registration status, bond, workers' compensation and any legal actions at Lni.wa.gov/Verify.
Paintzone is on that register as a construction contractor, license number PAINTL*811QD, Washington UBI 604 513 060.
The EPA's Renovation, Repair and Painting rule covers housing built before 1978, and anyone paid to disturb paint on those properties has to work for a certified firm. Paintzone is certified to work with lead paint.
Paintzone works in Seattle and across the Eastside, in Bellevue, Clyde Hill, Kirkland, Magnolia, Medina, Mercer Island, Newcastle, Queen Anne, Redmond, Renton and Sammamish.
Related services
To get started, request a painting quote or call (206) 899-5154. We are at 600 W Olympic Pl #503, Seattle, WA 98119.
